---
title: "Step-by-Step Gree AC Remote Control Instructions & Settings Guide"
description: "## Step-by-Step Gree AC Remote Control Instructions Quick guide to your Gree remote Mastering the **[Gree AC](https://www.aysonline.pk/gree-ac/) remote control** is the difference between fighting your air conditioner and forgetting it is there. Whether you have a standard unit or a…"
url: "https://www.aysonline.pk/docs/gree-ac-remote-control-guide/"
updated: "2026-07-27"
category: Air conditioning
---

# Step-by-Step Gree AC Remote Control Instructions & Settings Guide

## Step-by-Step Gree AC Remote Control Instructions

  Quick guide to your Gree remote

Mastering the **[Gree AC](https://www.aysonline.pk/gree-ac/) remote control** is the difference between fighting your air conditioner and forgetting it is there. Whether you have a standard unit or a **Gree inverter AC remote**, this guide covers every button, every mode symbol, and the two problems people hit most often.

**Buttons not responding?** Nine times out of ten the Child Lock is on. Hold **+** and **−** together for 3–5 seconds — jump to *How to Unlock* below.

### Understanding Gree AC Remote Functions

The **Gree AC remote functions** are built to balance comfort against running cost. This is what every button on a standard **Gree air conditioner remote** does:

| Button | What it does | Tip |
| --- | --- | --- |
| **Power** | Turns the unit on and off | Usually the large button at the top or centre |
| **Mode** | Cycles through cool, heat, dry, fan and auto | Watch the symbol on the screen change as you press |
| **▲ / ▼** | Raises and lowers the set temperature | 26°C is the efficiency sweet spot in Pakistani summers |
| **Fan** | Steps fan speed through low, medium, high and auto | Auto is quieter overnight and uses less power |
| **Swing** | Moves the louvres to change airflow direction | Point air upwards for cooling, downwards for heating |
| **Timer** | Schedules the unit to switch on or off | Set an off-timer for 2am rather than running all night |
| **Sleep** | Gradually shifts temperature overnight | Saves power and stops you waking up cold |
| **Turbo** | Maximum cooling for a short burst | Useful on entry, expensive if left on |

### Gree AC Mode Symbols Explained

The icons on the display are the most common source of confusion. Here is what each **Gree AC mode** symbol means and when to use it:

| Symbol | Mode | What it does & when to use it |
| --- | --- | --- |
| ❄️ | **Cooling** | The snowflake is **Gree AC cooling mode** — standard summer setting. |
| ☀️ | **Heating** | The sun is the **Gree heater mode** symbol, for winter. Only on heat-and-cool models. |
| 💧 | **Dry** | The water drop is **dry mode in Gree AC** — a dehumidifier that pulls moisture out on sticky days without over-cooling. |
| 🌲 | **Health / Scavenging** | The **tree symbol** runs the cold plasma generator (where fitted) to purify air and save energy. |
| 🌬️ | **Fan only** | Circulates air without cooling. Cheap to run on mild days. |
| A | **Auto** | The unit picks cooling, heating or fan itself based on room temperature. |
| 🔒 | **Child Lock** | A padlock means the keypad is locked and no button will respond. See below to clear it. |

### Advanced Features: I Feel, X-Fan & SE Mode

| Function | What it does |
| --- | --- |
| **I Feel** | The remote measures temperature where *you* are and reports it to the unit every 10 minutes, so the AC cools to your position rather than the wall. Keep the remote off the floor and out of direct sun. |
| **X-Fan** | A self-drying feature. After you switch off, the indoor fan keeps running a few minutes to dry the evaporator and stop mould and musty smells forming. |
| **SE Mode** | “Save Energy”. Holds the unit at its most efficient operating point to keep the bill down — best overnight. |

### How to Unlock Gree AC Remote

If your **Gree AC remote is locked** you will see a small padlock icon on the screen and no button will respond. This is the Child Lock, not a fault. To clear it:

1. **Find the lock buttons.** Locate **Plus (+)** and **Minus (−)** — the temperature up and down keys.
2. **Press and hold both together** for 3 to 5 seconds.
3. **Watch for the padlock to disappear** from the display. Keep holding until it goes.
4. **Release.** Your **Gree remote unlock** is complete and the buttons will respond again.

**Still locked?** On some models the combination is **Mode + Fan** held together instead. If neither works, the batteries may be too weak to register a long press — fit fresh ones and try again.

### How to Reset Gree AC Remote & Change Settings

If your **Gree remote control** is behaving oddly, a reset clears most problems.

- **How to reset a Gree AC remote:** switch the AC off, take the batteries out, wait 2–3 minutes until the screen is completely blank, refit the batteries and switch the unit back on.
- **Change Fahrenheit to Celsius:** with the AC off, press and hold **MODE** and **Minus (−)** together. The display switches between °F and °C immediately.
- **Set or cancel the timer:** press Timer to schedule. To cancel, press Cancel/Off, or press Timer repeatedly until the icon clears.
- **Remote not responding at all:** check the batteries first, then point it directly at the indoor unit from within about 7 metres with nothing blocking the sensor.

Once these are second nature you can set the unit precisely to the room and the weather instead of leaving it on one setting all summer. For model-specific detail, check the **Gree AC remote manual** supplied with your unit, and browse the current [Gree AC](https://www.aysonline.pk/gree-ac/) range if you are considering an upgrade.

### Frequently Asked Questions

  How do I turn my Gree AC on or off with the remote? Press the large red or centre power button on the **Gree remote control** to switch the air conditioner on or off.   What should I do if my Gree AC remote is locked? Press and hold the **Plus (+)** and **Minus (−)** buttons together for 3 to 5 seconds until the padlock icon disappears. On some models the combination is Mode and Fan instead.   How can I reset my Gree AC remote if it's not working? Turn off the AC, remove the batteries, wait 2–3 minutes until the screen is blank, refit the batteries and switch the unit back on.   How do I change the temperature display from Fahrenheit to Celsius? With the AC switched off, press and hold the **MODE** button and the **Minus (−)** button together to toggle between °F and °C.   How do I turn off the timer function on my Gree AC remote? Press the timer button repeatedly, or use the cancel/off button, until the timer icon disappears from the display.   What are the mode symbols on a Gree AC remote? The snowflake is cooling, the sun is heating, the water drop is dry mode, the tree is health or scavenging mode, the fan icon is fan-only and A is auto. A padlock means the keypad is locked.   How do I turn on heat mode on a Gree AC? Press the Mode button until the sun symbol appears on the display, then set your temperature. Heat mode is only available on heat-and-cool models, so if the sun icon never appears your unit is cool-only.   What is the X-Fan function on a Gree AC? X-Fan keeps the indoor fan running for a few minutes after you switch the unit off, drying the evaporator so mould and musty odours do not build up inside.

## Watch Video Tutorial

[How To Unlock GREE AC Remote Control ( How to Lock ) in 2 second](https://www.youtube.com/embed/HyXW5Cn3iuY?feature=oembed)

[Browse Gree Air Conditioners](https://www.aysonline.pk/gree-ac/)

Prices updated daily · 100% original with official warranty · zero down payment installments